Model SRV714 Series
Operating and Service Manual
Part No. MAN714_200601
Page 9 of 14
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
email:
Copyright 2020
S
Instruments, Inc.
BASIC SYSTEM OPERATION
NOTE
: Ensure that the scale is free and clear of any obstructions before operating.
STEP 1:
Turn the scale on. There is a “
ZERO/ON
” button located at the end of one Transducer
tube.
STEP 2:
Scan for Bluetooth devices on your Android device (or the tablet provided with the
scale). Then locate the SRV714 Bluetooth module in the list of devices. The Bluetooth
ID starts with “RNBT-” followed by 4 digits (also listed on the Calibration Form).
Select the appropriate device and pair.
STEP 3:
Open the SR Scales app (download free from the Google Play Store) on any supported
Android device (or the tablet provided with the scale) to allow for remote wireless
operation (Figure 6A).
STEP 4:
Click on the three dots in the upper right corner of the SR App and select to “Connect a
device” (Figure 6B).
STEP 5:
Select the SRV714 Bluetooth module from list of devices (Figure 6C). If the device is
not listed, the display may have turned off or it may not have properly paired. Pressing
the “Scan for devices” button on the bottom of the screen may also refresh the list.
STEP 6:
When the device is connected, a weight value will show in the “Real Time Weight”
area. Ensure that the Android Device is communicating with the scale by placing a load
on scale and verifying the reading in “Real Time Weight” area of the SR Scales App.
NOTE
:
The display will automatically shut down after ten (10) minutes of non-use. If the scale
becomes “Disconnected” from the Android device you must remove the animal from the weight
platform and press the “
ZERO/ON
” button located at the end of one transducer tube. After doing
so, you can reconnect your Android device. Assist the animal onto the scale platform and its
weight will appear on the display.
It is recommended that the system be zeroed prior to each subject being weighed.
Continued next page
Figure 6: SR App Operation
A
B
Example
Device
Scan for
devices
C