Model SRV411
i
Small Animal Floor Scale
Service Manual
Part No. MANSRV411
i
_210112
Page 7 of 16
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
Copyright 2021
S
Instruments, Inc.
BUTTON FUNCTIONS
Figure 1: SRV411
i
Button Label
HOLD/RECALL BUTTON
Scale will automatically lock a stable weight that is greater than five pounds and “MEM” will be
displayed in the upper left of the display. To manually hold a weight reading at any time during
the weighing process, press the “
Hold/Recall
”
button.
To recall a weight in memory, press the
“
Hold/Recall
”
button after the display has powered down or with less than five pounds on the
scale.
NOTE:
When the scale is off, pressing any of the buttons will turn on the scale. Press and hold
the
“Zero/Weigh”
button to erase the last held weight from memory.
LB / KG BUTTON
Weight data may be viewed in either pounds or kilograms. Pressing the “
lb/kg
” button allows
the operator to toggle between the two readings.
ZERO / WEIGH BUTTON
The “
Zero/Weigh
” button is used to zero the system before using the scale system. Ensure that
nothing is in contact with the weighing surface during this procedure. The display will read “
0.0
Lb
” (or
0.0
kg
).
The “
Zero/Weigh
” button also wakes up the display and shows the weight if it should Auto
Power Down before the weighing process is done.
NOTE
: When system is zeroed, the Hold/Recall memory is erased.
