Model – 3000 Gram x 1 Gram Scale
Instruction Manual - S/N 1000+
Part No.: MAN315_110121
Page 2 of 2
S
Instruments, Inc.,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
SCALE ASSEMBLY
1.
With the scale
OFF
, gently remove the top of
the scale by lifting the surface plate and
unsnapping it from the four (4) holes in the
weighing plate.
2.
Insert perch mounting screw along with washer,
through the hole in the surface plate. Place
Loctite® on screw. Thread screw into bottom of
the perch and tighten in place (Figure 1).
3.
Carefully align and snap the four (4) snaps on
the surface plate back into the weighing plate
(Figure 1).
TWO (2) YEAR LIMITED WARRANTY
SR Scales
®
systems are manufactured with high quality
components. SR Instruments, Inc. warrants that all
new equipment will be free from defects in material
or workmanship, under normal use and service, for
a period of two (2) years from the date of purchase
by the original purchaser. Normal wear and tear,
injury by natural forces, user neglect, and
purposeful destruction are not covered by this
warranty. Warranty service must be performed by
the factory or an authorized repair station. Service
provided on equipment returned to the factory or
authorized repair station includes labor to replace
defective parts. Goods returned must be shipped
with transportation and/or broker charges prepaid.
SR Instruments, Inc.’s obligation is limited to
replacement of parts that have been so returned and
are disclosed to SR Instruments, Inc.’s satisfaction
to be defective. The provisions of this warranty
clause are in lieu of all other warranties, expressed
or implied, and of all other obligations or liabilities
on SR Instruments, Inc.’s part, and it neither
assumes nor authorizes any other person to assume
for SR Instruments, Inc. any other liabilities in
connection with the sale of said articles. In no
event shall SR Instruments, Inc. be liable for any
subsequent or special damages. Any misuse,
improper installation, or tampering, shall void this
warranty.
Figure 1
: Scale Assembly
CAUTION
The integrated circuits and semiconductors on the
printed circuit boards may be damaged by
electrostatic discharge (ESD). Be sure to use
proper handling precautions at all times.
CALIBRATION
SWITCH ACCESS
IS LOCATED
UNDER STICKER
BATTERY
COMPARTMENT
Figure 2
: Battery Compartment Cover
email:
Copyright 2011
S
Instruments, Inc.