Model SRV957 24 X 48 Wall Mount Display Platform
Operating and Service Manual
Part No. MAN957_220721
Page 8 of 16
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
email:
S
Instruments, Inc.
BASIC SYSTEM OPERATION
TURNING SYSTEM ON
Make sure the scale is free and clear of any obstructions and all six feet are touching a level
surface. Touch the screen to awaken from sleep mode and press the “
ZERO
” button. The display
will read “
ZERO
” then display “
0.0
” when system is ready for weighing.
WEIGH
The “
WEIGH
” button is used to clear the “
RECALL
” memory and start a new weighing cycle.
RECALL
The “
RECALL
” button is used to recall the last stored weight. Recalled weight will be displayed
until the display is zeroed again, or until the “
RECALL
” button is pressed again.
NOTE
: The “
RECALL
” button is not displayed when there is no stored weight or when in
Continuous
weigh mode.
SLEEP MODE
With no weight on the platform, or after the display is zeroed, the display will “power down” to a
sleep mode after 20 seconds. Touch the screen to wake it up.
CONTINUOUS WEIGH
With Continuous Weight enabled (in the System Settings menu), the RECALL mode will be
disabled. “
RECALL
” button will not appear after a stable weight is seen.
AUTO HOLD
With Auto Hold enabled (in the System Settings menu), the RECALL mode will be enabled.
When the system detects a stable weight, that value will be stored in system memory. This value
can later be recalled by pressing the “
RECALL
” button with no weight on the platform.
UNITS
Weight Units can be changed in the System Settings menu. The system will remain in the same
mode as last used unless manually changed.
