4
Installation
D-BAG
Feed the end of the bridle through the grommet* on your d-bag until the block is flush against
the grommet and the two loops of webbing are sticking through to the inside. Secure these two
loops with the steel mallion that is provided. *NOTE: The SkySNATCH is designed to work in
conjunction with #4 or #5 size grommets ONLY.
Install the mallion to the inside of the D-bag as shown, around the bridle and through both loops.
ATTACHING BRIDLE TO CANOPY
Attach the end of the bridle to the canopy attachment point using the steel mallion provided. Make
sure the steel mallion feeds through both the webbing and the spectra loop at the end of the bridle,
and through ALL attachment loop webbing on the parachute.
Steel mallions must be set to
finger-tight, plus a quarter turn
(using a wrench). It is critical
that you do not under-tighten, or over-tighten, your mallions. All attachment points should be
inspected before every jump.
Bridle to canopy attachment.
Summary of Contents for Sky Snatch
Page 7: ...6 ...
