Keep zippers close against MLW webbing.
Handles completely exposed.
Zippers tight against MLW.
4
ZIPPER BUNGEES
The bungees that hold the zippers tight to the main lift webbing (MLW) of your harness must always
be connected.
DO NOT
jump your suit without the zipper bungees set tightly around your harness
MLW. Securing the bungees on the inside of the MLW usually results in the zippers being closer,
and the hole being smaller.
NOTE:
If you think that the zipper system is not functioning well with your skydive harness (i.e. your
emergency handles are not always 100% accessible), please contact us immediately before your
next jump. You may need to modify the zippers so that the sliders stay locked in place, as per the
information at this URL:
http://squirrel.ws/zipperstuff