Squire SVI STP SSME User Manual Download

Page: 54 / 57

SVI-STP SSME

Squire Technologies - Confidential Document

Page

Schema Validation and Configuration

11.1

Configuration

The XML file is loaded and validated via the GUI for the SVI-STP

Before starting the new configuration the GUI will perform the following actions against the XML
configuration file:



It will validate the XML against the XSD file to confirm that it is well formatted



It will pass the XML file to the SVI-STP, this will again validate the XML file, checking that the
resources references exist within the SVI-STP

Once the XML file has been validated against the SVI-STP the user then has the options to run test
XML elements before setting it to a live configuration

If selecting the running tests then the tests will be run on the SVI-STP and the results will be returned
to the GUI

Also the XML document will be updated with the information about the test results.

Summary of Contents for SVI STP SSME


























































Search results

Summary of Contents for SVI STP SSME

Reviews:

Related manuals for SVI STP SSME

Brands by name

Popular brands

Squire SVI STP SSME, User Manual

Search results

Summary of Contents for SVI STP SSME

Reviews:

Related manuals for SVI STP SSME

Brands by name

Popular brands