SVI-STP SSME
Squire Technologies - Confidential Document
Page
6
of
57
2
Overview
2.1
Overview
The STP SSME on receipt of an incoming message attempts to be the following actions in order:
Determine whether there is a STP SSME configuration set against the incoming linkset.
If so perform the following actions
o
Send the incoming messages to the SSME routing engine. The SSME routing engine will
return on of the following:
Reject – Return Error to the calling party for SCCP only if the return on error
flag is set
Ignore – Discard the message
Route – Sets the route for the outgoing message and then will return to the
SSME routing engine for any GT Transactions
NoRoute, Match, NoMatch – on all these returns the STP SSME will attempt to
use the internal routing engine set via the MTP resources, it will request from
the STP SSME any GT Translations required for the outgoing message
The flow chart below describes the actions
