Manual | Storm1000
5. APPENDIX
Your fixture will require regular cleaning to prevent a build up of dust and smoke debris on the optics and
housing. After disconnection of power, wipe down the fixture with a damp cloth. Never use alcohol or solvents
as this may damage the finish. Use glass cleaner for glass surfaces such as external lens or mirrors. A dry paint
brush is an excellent tool to remove surface dust.
Be sure to periodically check for loose parts that could damage the fixture or potentially allow the fixture to cau-
se injury. Make sure all overhead and wall installations have a secondary safety device installed such as a safety
cable rated for your fixture type and size. Check the power cord as well, make sure there is no damage that could
cause electrical shock, never remove the ground prong.
There are no user-servicable parts in this fixture. Do not attempt to open and repair this fixture. Return to the
factory for repair
Tech Specs
Power
Operating Voltage
220-240VAC 50/60Hz
Power Consumption
800W Max, 5A, pf: .75
Light Source
LED
630RGB LEDs，630 white leds, 50,000 hrs.
Optical
Beam Angle
140 degree
Luminous
38,000 lm
Thermal
Max.Operating Temp.
104 degrees F (40 degrees C) ambient
Control
Protocol
USITT DMX-512
DMX Channels
1/3/4/7/8/16 Channels
Input
3/5-pin XLR Male
Output
3/5-pin XLR Female
Operating Modes
Standalone, Master/Slave, Auto Mode
Other Information
A lot of things look cooler in slow motion. Eating isn’t one of them.
Warranty
1-year limited warranty, does not cover malfunction caused by damage to LED’s.t
Summary of Contents for Storm1000
Page 1: ...SquareLED Storm1000 ...
