DMX-512 CONTROL CONNECTIONS
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other
side to the male 3-pin XLR input of the moving head. You can chain multiple
Moving head together through serial linking. The cable needed should be two core, screened
cable with XLR input and output connectors. Please refer to the diagram below.
DMX-512 connection with DMX terminator
4
LCD DISPLAY
DMX IN
POWER IN
POWER IN
DMX IN
120
Ω
Pin2
Pin3
For installations where the DMX cable has to run a
long distance or is in an electrically noisy
environment, such as in a discotheque, it is
recommended to use a DMX terminator. This helps
in preventing corruption of the digital control
signal by electrical noise. The DMX terminator is
simply an XLR plug with a 120
Ω
resistor
connected between pins 2 and 3,which is then
plugged into the output XLR socket of the last
fixture in the chain. Please see illustrations below.
ZOOM KNOB
MENU
VICE MENU
POWER IN
POWER IN
