Manual | SquareLED LED MATRIX 16X30W COB BLINDER
1. Introduction
When you get this product, please take it from carton carefully to make sure whether all the accessories are in
and damaged or not. When you find that there are any parts or wrong sign with the carton, or non-operation,
please inform us and to keep the carton and shipping bill completely.
Please check the manual book before you operate the light. The rating current of the light listed which shows
the average current-consume under the normal circumstances.
All the lights must be offered shoot-through circuit, it could not be connected dimmer circuit, although the
dimmer channels are completely for 1-100% switch.
Warning! Confirm the voltage to select switch which can be matched the circuit with the light. If it is
different from the supply power and light, it will damage the light! All the light must be connected the
earth, not all the lights have the switch to be selected. Please connect the correct voltage!
Packing List
LED Matrix Light
Power cable
User manual
2. Safety Instructions
Please read these instructions carefully, it includes important information about the light’s installati-
on, usage and maintenance of this product.
Please confirm the same voltage to the light. The light could not be water-proof, it only allow to be used in
door. Don’t expand the light in wet or rain day, to avoid fire or damaged light.
Please confirm there is no flammable material around the light.
The light must be set up the ventilating place. The distance is = 51 cm around approach material. To check the
air passage is OK at any time. The Maximum temperature is = 40 °C. (104 °F).
When the lights has problems, please stop to use to contact the supplier. Don’t repair it by yourself!
Don‘t connect by a dimmer. To confirm the power wire is straight and non-damaged. Don‘t pull it directly.
Don‘t look at the bulb when the light is working to avoid any hurt.
»
»
»
