7
4.2 Power Connection
□
Power cable use 2.5mm2 copper core. When power serial connect,
AC220V connect 15 pcs fixtures Max; AC110V connect 8 pcs fixtures Max.
□
DMX512 signal cable connect 20pcs fixtures Max; When the
distance between console and fixture, or distance between two fixtures,
longer than 50M then add a signal amplifier is very necessary.
□
Recommend to plug a terminal in signal output socket of the last
fixture, which connected in the end of each signal transmission line. To
weld a 120Ω / 1W resistor between the male plug 2 and 3 feet to make a
terminal plug. The usage is to reduce the reflected wave interference
caused by the end of control signal cable's circuit open.
Hanging on
truss
