ADHESIVE MOUNT (OPTION 1)
Secure Stand to your counter with the included adhesive mounting plate.
Plug the hardware hub into Stand
Plug the cable from the hardware hub into
the bottom of Stand. Note: If the cable exits
the base of Stand on the right side (when
the screen faces you), Stand will swivel
clockwise. If the cable exits the base on the
left side, Stand will swivel counterclockwise.
Screw in the adhesive mounting plate
Make sure the hardware hub cable is firmly
pushed in, then screw in the adhesive
mounting plate.
Remove the adhesive backing
Check that the plate is tightly screwed in
and the base of Stand is locked with the
cable exiting from your preferred side, then
remove the adhesive backing.
Mount Stand to your countertop
Clean and dry the area where you want to
mount Stand, then firmly adhere Stand into
place. Press down for 30 seconds and wait
30 minutes for the adhesive to set.
Note: To remove the adhesive mount, pull the tabs on the mount slowly outwards. The adhesive will start to stretch until it detaches from the surface it was mounted on.
