GET UP AND RUNNING
1. Charge
It’s just like charging your phone.
Plug one end of the cable into your
reader, and the other end into a
computer or USB wall charger.
To check if your reader is fully
charged, press the power button
once. When you see four green
lights, you’re good to go.
Need help?
Watch step-by-step setup videos at
square.com/setup.
Note:
If you use Square Stand, simply plug in your Square Reader with the included
micro USB cable.
3. Connect
Grab your device. Turn on Bluetooth,
usually found in your device’s
settings. Open the Square app.
Tap (top left)
> Settings > Card
Readers > Connect a Reader >
Square Reader for contactless
and chip
. You’ll see the “Pair Your
Reader” screen. Leave this on.
2. Update
Make sure you have the latest
software for your smartphone or
tablet and the latest version of
the Square app. If you’re new to
Square, download the app from
the App Store or Google Play to
create an account.
4. Pair
Grab your reader. Press and hold
the power button for about three
seconds. When four orange lights
start flashing, release the button.
A Bluetooth pairing request will then
appear on your device. Tap
Pair
and
you’re ready to take payments.
M-LIT-0172-R4_GSG_8pg_US_M03.indd 4-5
10/25/17 1:23 PM
