SQlab
|
SPOR
TS ER
GONOMICS
|
HANDLEB
AR GRIPS
|
EDITION US 2
02
0-01
|
P
ag
e
6
SQlab grips
are to be used exclusively on bicycles under the conditions of their corresponding category according to ASTM F2043-13 or
a lower category.
Intended use
The different models of the SQlab comfort and performance grips have been developed according to their characteristics for the various
functional ranges of touring, everyday, city, trekking and MTB cycling and have been correspondingly tested in numerous laboratory trials
and many kilometres of cycling. Using an improper grip may result in cycling errors, falls and accidents.
When describing the intended use, we follow the international categorisation ASTM F2043-13, which precisely describes the different
functional ranges.
Category 1
according to ASTM F2043-13
Bicycles/add-on components in this category must only be used on tarred or paved roads and paths on which the
wheels have permanent ground contact.
Category 2
according to ASTM F2043-13
Bicycles/add-on components in this category may, in addition to the conditions of use referred to in category 1,
also be used on gravel and unpaved roads of a moderate grade. In this category, there may be a short-term loss
of tyre ground contact in harsher terrain. Jumps (drops) from a height up to max. 15 cm can take place.
Model designation
Use category according to ASTM F2043-13
eBike Ready Label
SQlab 702
Category 1
Yes
SQlab 710
Category 2
Yes
SQlab 710 short
Category 2
Yes
SQlab STUBY
Category 2
Yes
SQlab STUBY short
Category 2
Yes
SQlab 7OX
Category 5
Yes
SQlab 711R
Category 4
No
SQlab 711 / SQlab 711 ltd. RUH
Category 4
Yes
