All images are for illustration purposes only. Actual products may vary.
All rights reserved.
©
SQ Professional Ltd 2016
.
SQPro Senza Electric Kettle
troublEShootIng
SECtIon
SQPro Senza Electric Kettle
Wiring instructions - UK plugs only
The product must be
earthed. It has a
13A
BS1362
fuse in a 13A BS
1363 plug. To replace the
plug, fit the green-yellow
wire to or
E
, blue wire to
N
and the brown wire to
L
.
Fit the cord grip. If in doubt,
call an electrician. Do not use a non-wireable plug
unless the fuse cover is in place. If you remove the
plug, dispose of it.
Environmental protection
To avoid environmental and health
problems due to hazardous sub-
stances in electrical and electronic goods, ap-
pliances marked with WEEE symbol must not
be disposed of with unsorted municipal waste,
but recovered, reused or recycled.
Service
If you ring Customer Service, please have the
Model No.
to hand, as we won’t be able to help
you without it. The product is not user-serviceable.
If it is not working, read the instructions, check the
plug fuse and main fuse/circuit breaker. If it is still
not working, consult your retailer.
If that does not solve the problem – ring Customer
Service – they may be able to offer technical advice.
If they advise you to return the product to us, pack
it carefully, include a note with your name, address,
day phone number, and description of the prob-
lem. If under a guarantee, say where and when
it was purchased and include proof of purchase.
Send it to SQ Professional Ltd.
GUARANTEE
THE WARRANTY FOR THIS PRODUCT IS COVERED BY
SQ PROFESSIONAL LIMITED. ANY FAULTS WITH THIS
PRODUCT ARISING THROUGH A MANUFACTURER
DEFECT WILL BE COVERED FOR 1 YEAR FROM THE
DATE OF PURCHASE, SUBJECT TO A VALID PROOF OF
PURCHASE BEING PRESENTED. THIS DOES NOT IN-
CLUDE FAULTS OR DAMAGE CAUSED BY MISUSE OF
GENERAL WEAR AND TEAR.
PLEASE CONTACT CUSTOMER SERVICES ON 01992
716 070 OR [email protected], MON-
DAY TO FRIDAY FROM 09:30 - 17:30.
THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS.
Voltage Business Centre, Units 1 - 3
6 Mollison Avenue, Enfield, EN3 7XQ
T: 01992 716 070
F: 01992 700 538
www.sqprofessional.com
Troubleshooting
Problem
Possible causes and solutions
Turns off
before boiling
1
Scale has built up. De-scale the kettle.
2
There is inadequate water in the kettle, causing the boil-
dry safety cut off to activate. Add cold water to the kettle
and leave for 2 minutes. This should reset the kettle.
Kettle will
not turn on
1
Plug is not connected properly. Check connection.
2
Power cord is damaged. Return kettle for repair.
3
Boil-dry safety cut off has been activated. See above for
possible solution.
Particles in water
Most likely caused by scale build-up.
De-scale the kettle as described in the instructions.
