SQ Professional dainty, Instruction Manual

Page: 4 / 4

SQ PC 5976-5978 01-03-18 V4 | SQ Professional Ltd © 2018 All rights reserved
Dainty
™
Legacy Electric Kettle
CARE & MAINTENANCE
SWITCHING ON
1 Place the kettle on the base unit . Make sure
that the kettle is locked on to the 360˚ connector,
which allows the kettle to be put in any position
(ideal for left and right handed users).
2 Plug the stand into a power socket (switch the
socket on, if it’s applicable).
3 Switch the kettle ON . The water level in di ca tor
will light up and the kettle will start heating up the
water.
SWITCHING OFF
1 Once the water is boiled the kettle will au to ­
matically switch off.
2 Lift the kettle from the base and hold it le vel
to avoid splashing the hot water. To boil the wa -
ter again, place it back on the ba se unit
and
switch to ON again (
wait for a mi nu te after the
kettle has switched off before switching it
on again ).
3 If there is not enough water in the kettle or if it’s
empty, it will switch the power off au to ma ti cal­
ly. To switch it back on, refill the kettle and wait
a few minutes for it to cool down. Then use as
normal. Using in suf fi ci ent water will shorten the
life of the ap pliance.
CARE & MAINTENANCE
1
Always check that the kettle is switched
off before cleaning.
2 Unplug the base (switch the socket off first, if
applicable) and let the kettle cool completely.
3 Wipe the kettle, inside and out, with a damp
cloth. Do not use abrasive cleaners on the out -
side of the appliance to avoid scratching the
surface.
4 Ensure that all connectors and sockets are com -
pletely dry.
FILTER REMOVAL
1 Ensure that the kettle is cool.
Open the lid .
2 Lift the filter upwards from its holder.
3 To fit the filter in the kettle again, slide it ca re­
ful ly in the side guides of the filter hol der un -
til it clicks into place. Unless the fil ter is fitted
correctly, the kettle lid may not close and lock
securely.
DESCALE - EVEN IN SOFT WATER AREAS
1 This appliance is fitted with concealed heating
ele ment and must be descaled re gu lar ly. The
frequency of descaling depends on usa ge and wa -
ter hardness. Excessive scale cau ses overheating
causes overheating, re du ces the kettle’s life, and
may trigger the boil­dry cut­out, as well as damage
to the ele ment which invalidates the warranty.
2 Use appropriate descaling product sui ta ble for
stainless steel, glass or plastic and fol low the
provided instructions carefully.
3 Pro ducts returned under guarantee with faults
due to scale will be subject to a re pair charge.
WIRING INSTRUCTIONS -
UK PLUGS ONLY
This appliance must be earth ed. It has
a 13A BS1362 fuse in a 13A BS 1363
plug. To re place fuse, comply with the
standard 13A BS1362 for fuse. If in doubt, call an elec -
trician. Do not remove the plug.
ENVIRONMENTAL PROTECTION
To avoid environmental and health problems
due to ha zar dous substan ces in electrical
and electronic goods, ap pli ances marked
with this symbol must not be disposed of
with un sort ed municipal waste, but re co ve red, re­
used or re cy cled.
SERVICE
If you ring Customer Service, please have the
Mo del
No.
to hand, as we won’t be able to help you without
it. The product is not user­serviceable. If it is not work -
ing, read the instructions, check the plug fuse and main
fuse/circuit breaker. If it is still not working, consult your
retailer. If that does not solve the problem – ring Cus -
tomer Service – they may be able to offer technical ad -
vice. If you are advised to return the product to us, pack
it carefully, include a note with your name, address, day
phone number, and description of the problem. If under
a gua ran tee, say where and when it was purchased and
include proof of purchase. Send it to SQ Professional Ltd.
WARRANTY
THE WARRANTY FOR THIS PRODUCT IS COVERED BY SQ
PROFESSIONAL LIMITED. ANY FAULTS WITH THIS PRODUCT
ARISING THROUGH A MANUFACTURER DEFECT WILL BE
COVERED FOR 1 YEAR FROM THE DATE OF PURCHASE, SUB-
JECT TO A VALID PROOF OF PURCHASE BEING PRESENTED.
THIS DOES NOT INCLUDE FAULTS OR DAMAGE CAUSED BY
MISUSE OF GENERAL WEAR AND TEAR. PLEASE CONTACT
CUSTOMER SERVICES ON 01992 716 070 OR SEND AN E-
MAIL TO INFO@SQPROFESSIONAL.COM, MONDAY TO FRI -
DAY FROM 09:30 ­ 17:30. THIS DOES NOT AFFECT YOUR
STATUTORY RIGHTS.
Voltage Business Centre | Units 1 ­ 3
6 Mollison Avenue • Enfield EN3 7XQ
T: 01992 716 070 • F: 01992 700 538
info@sqprofessional.com
www.sqprofessional.com