BEFORE FIRST USE
BEFORE ATTACHING OR REMOVING ANY PARTS, MAKE SURE THE MAINS
CABLE IS UNPLUGGED FROM THE POWER SOCKET AND THE SPEED CONTROL
IS IN THE 0 POSITION.
Prior to first use, wash all the parts that come into contact with food
with warm soapy water and dry thoroughly (see section on Cleaning
& Storage).
ALWAYS TAKE CARE WHEN HANDLING THE STAINLESS STEEL
BLADES AS THEY ARE VERY SHARP.
OPERATING INSTRUCTIONS
Follow the Important Safeguards and instructions below to achieve the best
results and to keep your appliance in good working condition.
•
Do not exceed the recommended maximum quantities.
•
Do not use the appliance to process ingredients that are hard (e.g.
frozen meat, inedible parts of ingredients such as bones and pips),
rubbery or sticky (e.g. candied orange peel).
FOOD PROCESSING
ALWAYS REMOVE THE BLADES BEFORE REMOVING THE INGREDIENTS FROM
THE BOWL.
THE APPLIANCE WILL NOT OPERATE IF THE MIXING BOWL COVER OR BLENDER
JUG LID ARE NOT CORRECTLY FITTED.
DO NOT ATTEMPT TO REMOVE THE BLENDER JUG LID OR MIXING BOWL COVER
WHILE THE APPLIANCE IS IN OPERATION.
CHOPPING
Suitable for single stage cake mixes, kneading butter into flour, adding
water to mixtures and chopping, puréeing or whisking.
1
ensure that the appliance is unplugged, then place the drive shaft
15
on the motor unit
6
.
2
Place the mixing bowl
12
on the drive shaft
15
with the handle on
the right-hand side. align the triangle on the bottom edge of the
mixing bowl
12
with the open lock symbol on the motor unit
6
.
3
Turn the mixing bowl
12
clockwise to lock it in place. The triangle
on the bottom edge of the mixing bowl
12
must be aligned with the
closed lock symbol on the motor unit
6
in order to operate the
appliance.
operation
diagram
a
4
Mount the blade retainer
19
on the tube in the middle of the
mixing bowl
12
.
operation
diagram
b
5
Fit the chopping blade
17
onto the blade retainer
19
and ensure
that it sits flat on the bottom of the mixing bowl
12
, with the lower
blade almost touching the bottom.
Exercise extreme care
when handling the chopping blade
17
as it is very
sharp. Only hold the plastic part.
6
Place ingredients into the mixing bowl
12
. Large pieces of food
should be cut into 2cm cubes first.
operation
diagram
c
7
Place the mixing bowl cover
11
onto the mixing bowl
12
with the
feeder tube
10
on the right-hand side. align the triangle on the
edge of the mixing bowl cover
11
with the open lock symbol on
the upper rim of the mixing bowl
12
.
8
Hold the feeder tube
10
with your left hand and the mixing bowl
12
handle with your right hand. Turn the mixing bowl cover
11
clockwise
until it clicks into place. This will engage the safety interlocks
5
in
the handle and ensure the mixing bowl
12
is securely attached, so
that the appliance is safe to operate.
operation
diagram
d
9
Plug the mains cable into the electric socket. Rotate the speed
control
7
to the desired speed.
operation
diagram
e
10
To activate a short, powerful impulse movement, press the
PULSE
button
8
and hold for the desired time. When released, the
appliance will return to the initial speed setting selected on the
speed control
7
.
11
When the chopping process is finished, turn the speed control
7
to
0
, ensure the appliance has come to a complete stop and then
unplug the mains cable from the electric socket.
12
Hold the handle of the mixing bowl
12
with your right hand and
the feeder tube
10
with your left hand, and turn it anti-clockwise
to release the safety interlock
5
. after this, remove the mixing
bowl cover
11
by turning it anti-clockwise to unlock it.
13
Carefully lift the blade retainer
19
with the chopping blade
17
attached, then push the handle of the mixing bowl
12
anti-
clockwise to unlock it. Following this, lift the mixing bowl
12
carefully
and empty the ingredients.
WHISKING
Suitable for beating egg whites, mixing eggs and sugar, making a batter,
and whipping cream.
The whisking function has the same operating steps as the chopping
function. Simply replace the chopping blade
17
with the mixing blade
18
.
operation
diagram
b
SLICING, GRATING AND SHREDDING
FOOD SHOULD BE CLEANED AND CUT INTO PIECES THAT FIT INTO THE FEEDER
TUBE. ALWAYS USE THE PUSH COVER TO PUSH THE FOOD DOWN.
Suitable for processing firm foods such as carrots and hard cheeses, as
well as softer foods such as tomatoes and cucumbers.
1
ensure that the appliance is unplugged, then place the drive shaft
15
on the motor unit
6
.
2
Place the mixing bowl
12
onto the drive shaft
15
with the handle
on the right-hand side. align the triangle on the bottom edge of the
mixing bowl
12
with the open lock symbol on the motor unit
6
.
Turn the mixing bowl in a clockwise direction to lock it in place. The
triangle on the bottom edge of the mixing bowl
12
must be aligned
with the closed lock symbol on the motor unit
6
in order to work
the appliance.
3
Mount the blade retainer
19
onto the tube in the middle of the
mixing bowl
12
.
operation
diagram
a
4
Hold the blade disc with one hand and insert one of the slicing
blades
20 21
, shredding blades
22 23
or a slurry blade
24
onto
the opening of the blade disc
16
with the other hand. ensure that
the hole in the blade sits on top of the hole in the centre of the
blade disc
16
.
operation
diagram
f
All images are for illustration purposes only. Actual products may vary.
USe & CaRe
2 in 1 Food Processor Instruction Manual
5
