Charging the Device
Powering the Device
Lift the flap covering the charging port and plug the charger into the unit via
USB port, then into an electrical outlet. When fully charged as indicated by the
battery icon to the bottom right on the device, remove the device from the
charger.
The battery icon will have a diminishing fill eventually resulting in a red
portion with empty outline indicating a low battery. Recharge the device as
needed.
*The SIM card is already installed in the device. Do not remove or replace it.
To turn the device on, press the Power button once. As the device reaches the
satellite(s), the middle light will begin blinking and any movement will be
reported in time increments according to the GPS plan. To turn the device off,
press the Power button again
Placing the Device
Make sure that the device is placed near a window or on a surface that does
not obstruct the signal reception. It is best not to be placed in a trunk. Watch
the signal lights to ensure that the best reading is made.
Spy Tec
www.spytecinc.com
Spy Tec
www.spytecinc.com
5
