SPYTEC CIRRUS i6 INDOOR PTZ HD CLOUD SECURITY CAMERA USER GUIDE
3
Installing the Stand
If you’d prefer to elevate the camera on a tabletop or mount it securely to a horizontal
or vertical surface, use the included adjustable stand. Insert the knob on screw
through the stand’s center hole and into the threaded socket at the bottom of the
camera. Position the camera with its input/output panel on the same side as the
stand’s dual knobs and tighten the knob beneath the platform. Use the dual knobs
to adjust the angle of the platform based on whether the camera will be mounted
horizontally or vertically. Once you’re happy with the orientation, temporarily remove
the camera so you have clear access for attaching the platform to a shelf or wall.
Two screws and stents are included for mounting. You may need to drill holes in the
intended mounting surface.
Installing the Camera
Insert a microSD card with a storage capacity of up to 32GB into the slot on the rear
panel. Be aware that the attached antenna may block the line-of-sight of the pivoting
lens. You can avoid blockage by pointing the antenna down or to the side. Attach the
camera to an electrical outlet using the included AC adapter. Connect the Ethernet
cable to an RJ-45 port on your router or hub. On first setup you’ll need to use the
wired connection. Afterwards, you’ll be able to switch to Wi-Fi. Press the FN button for
connecting to the Wi-Fi network.
