18
19
English
English
When «Security» mode is activated, the
operation is the same as in «Cellular» mode,
except
:
• The camera makes a self check every minute
to verify if images have been taken. If so, the
camera will transmit to the mySPYPOINT
™
user’s account.
•
The camera still communicates with
mySPYPOINT
™
server following the
presets of the options «Synchronize» and
«Synchronize at».
• If the option «Multi-shot» is enabled, the
transmission is performed once the series of
photos is recorded.
• The option
«Security Alert» is available on the
mySPYPOINT
™
user’s account. This option
can be activated via mySPYPOINT
™
only
(see "SMS Configuration" for details).
Note: Security
mode is recommended for use
in areas where detections are rare and where the
camera can't be powered by a main electricity
supply. It is a good compromise between
security and battery life.
Country
Allows the user to choose the country in which
the camera is used. This option displays the list
of the corresponding cellular providers.
Carrier:
This setting must correspond with the user's
service provider. Choose the one corresponding
to the SIM card among the list of compatible
providers.
Synchronization
:
(1/2/6/12 times
a day)
Sets the daily number of synchronisations
between the camera and the server.
This option changes the frequency at which the
camera communicates with the mySPYPOINT
™
server in order to update its status or to send
photos on the user’s account.
Synchronize
at:
Defines at what time of day the camera
communicates with the mySPYPOINT
™
server in order to update its status or
to send photos on the user’s account.
(Over a period of 24 hours)
e.g.1
: The option «Synchronize at» is set to
04:00 and the option «Synchronize» is set to 6/
day.
The camera performs 6 synchronisations per day
and begins its first transfer at 4h, then at 8h, 12h,
16h, 20h and 24h.
e.g.2
: The option «Synchronize at» is set to
01:00 and the option «Synchronize» is set to 2/
day.
The camera performs 2 synchronisations per day
and begins its first transfer at 1h, then at 13h.
Transmit
format:
(Thumbnails/
Large)
Sets the photo size sent to the mySPYPOINT
™
user’s account.
Thumbnails:
160x120 pixels
Large:
640x480 pixels
Note
: It is recommended to use the format
«Thumbnails», since many more photos can
be sent on the mySPYPOINT
™
user’s account
in that format and thus, reduce the amount of
cellular data transmitted. The user can still, from
his account, choose among his «Thumbnails»
format photos which ones he wants to receive
in «Large» format in the next synchronisation of
the camera.
Note
: If the camera is configured with the power
option «Electricity», the selected photos will
be transferred in «Large» format at the next
synchronisation.