Spypoint IR-6, User Manual

Page: 25 / 49

25
In « PHOTO » or « VIDEO » mode, if the card is locked, the
panel indicates « LOC » and the light in the front of the camera
winks quickly.
SETTINGS
Date, Time, Temperature and Picture Quality
Turn « OFF » your camera; set switch « MODE » to « SET/
TEST » and turn « ON » the camera. Press « MENU/OK ».
An « H » will flash on the screen indicating that the camera
is in High Resolution (6 MP). Use the « DOWN » button
if you want to reduce the resolution to « L » (3 MP). Press
« MENU/OK » to set the date and time. Use « UP » and
« DOWN » to change the blinking digit. Choose « F » or
« C » to display the temperature in Fahrenheit (°F) or Celsius
(°C). Press « MENU/OK » to go to the next option. Once
finished, press « MENU/OK » and turn « OFF » the system to
save the changes.
MODE
When the « PHOTO » or « VIDEO » mode is selected, the
test light in the front of the camera flashes for 60 seconds to
allow the user to leave without being photographed or filmed.
When the « SET/TEST » mode is selected, no picture or video
is recorded.
Walk perpendicularly in front of the camera.
When
the camera detects movement, the light winks to indicate that
normally, a photo or video would be recorded.
If the system does
not detect the movement, increase the distance detection using the
wheel
« DISTANCE »
or realign the system differently. When you
understand how the device responds to detections, you can better
adjust the direction or the height of the installation.
When the
switch is set to « VIEW », you can view the recorded pictures
or videos on television.
DELAY
To select the time interval before the camera records another
photo or video. This option prevents from taking too many
photos or videos.
English