A memory card is required to record photos and videos. The camera is compatible with SD/SDHC memory
cards, up to 32 GB capacity (sold separately).
When the camera is turned on and no memory card is used, the camera displays "Insert memory card."
Here is a table of the approximate number of pictures and videos in terms of duration that can be recorded
with different memory card capacities.
Note :
This SPYPOINT camera is equipped with continuous file recording. When the memory card capacity is
full, the camera will continue to record photos or videos by deleting the oldest recorded files.
Inserting the memory card
Before inserting or removing a memory card, always turn the camera off to prevent any loss or damage to
photos already saved on the memory card. Also, make sure the switch on the side of the SD card is not set on
LOCK.
Insert a standard full-size SD/SDHC memory card (up to a 32 GB capacity) in the SD card slot with the label
facing up. The card is inserted correctly when a click is heard.
Removing the memory card
Gently press down on the exposed edge of the memory card once to eject and remove the card from the slot.
memory card and busy light / 6
memory card
busy light
The busy light is found on the back of the camera. This light is used as a diagnostics tool. It will turn on upon
camera start-up and when the camera saves a file. When the camera is in DETECTION TEST mode, both the
BUSY and TEST lights will be on simultaneously.
We recommend formatting your SD card whether
it was used in another device before or not. Thus
ensuring that you benefit from its full memory
capacity. Quick formatting is NOT recommended
for this task
Memory
4 GB
8 GB
16 GB
32 GB
12 MP photos
1,600
3,200
6,300
12,600
1280 x 720 videos
40 m
1h20
2h40
5h20