6
VIDEO-LENGTH
Selects the video length when the camera is set in video mode.
DISTANCE
The distance dial sets the motion detector sensitivity. Use this
feature to set the detection range required. Turn dial to the
right to increase distance. Range of detector is between 5 and
50ft. The best method to determine a proper distance is to turn
“MODE” switch to “Set/Test” and to walk perpendicularly to
the front of the camera where action is anticipated. When the
detector is activated, the test light on the front of the camera
will blink once. At this moment, the camera operator may want
to adjust the distance setting, and/or change the direction or
height of the camera.
ChANGE OF ThE LIGhTING MODULE
It is necessary to turn the camera OFF, to remove the batteries
and to wait 2 minutes before replacing the visible lighting flash
module by the IR-35 infrared module. Simply raise the module
with the fingers by the spaces designed for this purpose in order
to remove it. Then, slowly reintegrate the replacement module
by taking care not to damage the metal connectors at the back
of the module.
English
IR-35 IR infrared module
Visible flash module
