10
11
English
English
VIDEO
Press OK to select VIDEO ; the test light in the
front of the camera will flash for 60 seconds to
allow the operator to walk away from the camera
without being recorded.
TEST
To set the camera and the desired distance, select
TEST mode. No picture or video will be recorded.
Walk in front of the camera. When the camera
detects movement, the light flashes to indicate that normally,
a photo or video would have been recorded. If the system does
not detect the movement, increase the distance detection using
the dial DISTANCE or realign the system differently. Once
you understand how the device responds to detections, you can
better adjust the direction or the height of the camera.
In TEST mode, it is possible to take a picture by pressing
the OK button. The photo is saved and appears in the
VIEW mode.
How to properly install your camera
using the supplied installation strap:
(Recommended installation height: about 3 feet).
Video
T
Test
SETTINGS
Allows the operator's own settings. To set the
system in English, hold the button
until
"Language" is highlighted. Press OK, select
"English" with the button
or
and confirm your choice
with OK. The system will than change the menus to English.
Time Start /
Time Stop:
Allow the user to set the period of operation
of the camera. The start and stop times are
the hours during the camera is in action
and records pictures or videos. Example:
If the user selects "7:00 am" start time and
"11:00 am" stop time, the camera will only
detect for that period of time and will stay
inactive for the remaining hours. Press OK
and use
or
to adjust the hours. Press
again OK to set the minutes. When the time is
properly set, press OK.
For an activation of 24 hours, the same start
and stop times must be entered (example:
00:00 as start time and 00:00 as stop time.
These hours are the basic settings of your
camera)
Note:
The
hours are recorded over a 24-hour
period. For example, 5pm is 17:00 (00:00
means midnight).
Delay:
(10s/30s/1m/5m/
15m/30m)
Select the time interval between photos or
videos.
Note:
A shorter detection delay results in a
shorter battery life.
Multi-shot:
(1/2/3/4/5/6
consecutive shots)
Take up to 6 consecutive shots for each
detection, with a 10-second delay between
each photo. This option allows up to 6 pictures
from different angles when the camera is in
PHOTO mode.
Settings
Test light
