manualshive.com logo in svg

SPYKER 76-22, Operation Manual Service Manual Parts List

Share
Download
SPYKER 76-22 Operation Manual Service Manual Parts List Download Page 2

2

1.

Sit spreader

assembly on 

hopper as shown.

2.

For 

stainless

steel models

remove nuts and

bolts that attach

front of hopper to

frame as indi-

cated, and then

insert Bump Bar

(3) into frame

assembly. Next,

re-insert bolts and

tighten nuts.

Tow Behind Frame Assembly

Note:

For 

black frames

remove nuts and bolts

that attach front hopper to frame. Push

bump bar into frame (Black bump bars do

not have holes drilled in them). Re-insert

bolts and nuts and tighten against the

bump bar.

1

Tools you will need:

Medium Sized Screwdriver
7/16” & 3/8” wrenches
Hammer
Pliers

Parts for Models:

76-22 96-22
78-22 98-22

• (3) 1/4 - 20 x 1 1/2" 55 bolt

• (8) 1/4 - 20 55 hex nut

• (3) 1/4 - 20 x 1 3/4" 55 bolt

• (1) 1/4 - 20 x 2 3/4" 55 bolt

• (1) 1/4 - 20 x 1" bolt

• (2) 10 - 24 x 1 1/2" 55 bolt

• (2) 10 - 24 55 lock nut

• (2) handle grips

• (1) agitator wire

• (4) handle/tow bar braces

• (1) cable clamp

• (1) felt washer

• (1) manual

• (1) 1/4 - 20 x 1" 55 bolt

For Quick and Easy Assembly - First Read Entire Procedure

Then Follow Carefully The Step by Step Instructions

Assembly Instructions

Parts you will use:

Summary of Contents for 76-22













Reviews:

No comments

Brands by name

Popular brands

Load more brands