SPYKER 76-22 Operation Manual Service Manual Parts List Download Page 1

Spreading Chart

Operation Guide

Service Manual

Parts List

For Models:
76-22 96-22
78-22 98-22

Model: 
98-22 
pictured

spread with confidence

spread with confidence

It’s the spread that counts

It’s the spread that counts

P.O. Box 7

140 Mill Street

Urbana, IN

46990  USA

1-800-972-6130
Fax: 260-774-3416

© 2004 Spyker Spreaders – Urbana, IN U.S.A. 

05-99-0078

P.O. Box 7  • Urbana, IN  46990  USA

1-800-972-6130  •  Fax 260-774-3416

"ACCUWAY'' Spread Pattern Equalizer

ENSURES spreading dead center of the
spreader. 

(Indicated with "22" in model number)

Gears are unconditionally guaranteed

ENSURES trouble free operation.

Dial-A-Matic spread rate control

ENSURES spreading at exact spread
rates.

Optional BORDER PATROL spread pattern

cut-off prevents spreading on drive-ways,
flower beds, etc.

Extension hoppers available for all round 

hopper spreaders. Adds 20 lbs. to 
capacity.

Shipped Set-Up. Saves time and labor

ENSURES proper assembly. (except #64)

Stainless steel frames ensure longer

spreader life, easier maintenance and

present a quality image.

High grade plastic non-corroding wheels

with nylon bearings, no lubrication

required, ENSURES trouble free 

maintenance.

FEATURES &
BENEFITS

MODEL 299

Mulch Spreader

MODEL 298

Mulch Spreader

MODEL 88

MODEL 179

20 SERIES

120 SERIES

    

Summary of Contents for 76-22













Reviews: