Page 2 of 3
Operation
The SSP17 2-Position switch panel features an integrated 400 Mhz Transmitter that wirelessly sends
messages to a receiver device. Each switch panel has a green
“Transmit
LED”
located at the center of the switch
panel. This LED should turn on whenever a button is being pressed or held, indicating that the switch panel is
transmitting.
The messages sent out by each switch panel has a unique identifier which is used to distinguish them from
one another. The message sent out when pressing a button also indicates which button is being pressed to allow
the receiving device to perform a unique action for each button. The wireless receiver device only acknowledges
messages from switch panels that are paired with it. To pair a SSP17 2-Position switch panel with the receiving
device, put the receiving device into pairing mode (folowing the instructions for the receiver device), then press and
hold both buttons on SSP17 2-Position switch panel to pair.
Transmitting
Not Transmitting
Transmit LED
