NOTE:
Ensure the unit is fully charged (about 6-8 hours) and plug-in an SD card (up to 256GB).
HOW TO FORMAT HIGH CAPACITY SD CARDS (64-256GB):
1. Insert an SD card and plug the device in for power, but do not turn it on. The orange charge
light will come on.
2. Insert a pin or something small and thin into the “Upgrade” hole and release when the orange
charging light starts to flash red.
3. Press the “Upgrade” button again and release when the flashing red light starts to flash
green.
4. Disconnect the camera from the power source and the SD card will now be formatted for use
with this camera.
HOW TO TURN ON THE CAMERA:
1. Hold down the power button on the right side of the unit for 3-5 sec. The indicator light will turn a solid
green color; once the indicator light is flashing green, the device is now recording.
●
Green LED light On = Camera is turning On
●
Green LED Flashing light = Camera is recording
●
Green/Red LED Flashing light = Battery Low and recording
●
Red LED light = no card, card fail or card full
NOTE:
The camera’s default record mode is Continuous Record mode.
HOW TO TURN CAMERA OFF:
1. Hold down the power button on the right side of the unit for 3-5 sec. The indicator light will turn a solid
orange color; once the orange color is gone, the camera is now off.
CONTINUOUS RECORD MODE
:
1. This setting will keep the unit turned on and continuously recording with roughly 9-hours of battery life.
With no adjustments made through the Camera Widget, this will be the default recording mode when
turning on the device.
