How to Record a File:
1. Connect the Mini USB to power.
2. When the vehicle is turned ON the recorder will turn on and begin recording.
3. When the vehicle is turned OFF the recorder will automatically turn OFF (you can turn OFF the dash
camera while the vehicle is turned on if you'd like by pressing and holding the power button for 5
seconds).
4. If you want to manually stop a recording, you can press the "REC" button.
5. If you would like to manually start a recording, press the "REC" button again.
How to Access / Navigate the Menu:
1. From the recording mode, press the "REC" button to stop recording, putting the dash camera into
standby mode.
2. Click the MENU button to access the menu.
3. Use the REC and MIC buttons to go up and down through the menu options.
4. Press the ALARM button to confirm a selection, use the MENU button to back out of a selection or
sub-menu.
How to Set the Date / Time:
1. Follow the steps above to access the menu. (
How to Access / Navigate the Menu
)
2. Navigate to the option that says "Date / Time" and use the ALARM button to enter the sub-menu.
3. Use the REC and MIC buttons to change the time and date, to your current time and date. Use the
ALARM button to confirm the time and date.
4. Press the MENU button to back out putting the camera back to its main recording mode,
How to Playback files on the Device:
1. End the individual recording; tap the REC button for 1 second.
2. Once the Red (Recording) light is OFF, Press the (!) button for about 1 second putting you into the
recorded files menu.
3. To select a file use the (REC) and (MIC) button to navigate.
4. Once highlighted press the (!) button to select.
5. To Play the file press the (!) Button, this also can be used to pause the recording.
6. To exit Playback, tap the (MENU) button 2 times.
