How to Record a Voice Activated AUDIO file:
● On the top of the device is an
ON/OFF
switch
● Slide the switch into the
ON
position.
● A
RED
LED light will turn on
●
When the
Red
LED light is present.
Press
and
Hold
on the
( - )
or the ( + ) button. The
same red light will then switch to a
BLUE
LED, then flash a few times before
disappearing. When you see the blue light you know you successfully started a voice
activated recording.
● When finished slide the switch into the
OFF
position.
● Please wait about
10
seconds before starting the next recording.
NOTE: Voice activation will not extend the battery life of the device
NOTE: If the device runs out of power during the recording, it will finalize and save the
file before the battery dies
How to Playback Files on the Device:
● Make sure the device is turned
OFF
first
● When in the off position, plug in your headphones.
●
Slide the switch into the
ON
position.
● Blue light = Standby mode/ music folder, and the device will begin playing an audio file
● Next to the solid light is a
( - )
and
( + )
button
● The
( - )
button switches the device from Music folder to Recorded files folder.
● The music folder contains a SpyCentre audio file, to switch over to your recorded files
tap the
( - )
button
● Red light = Recorded files folder
● To skip to the next files press the
( + )
button.
● To change the VOLUME of the recording being played
Press
and
HOLD
the
( + )
or
( - )
button.
NOTE: If the device is turned off while playing back audio on the device, the next time the
playback mode is entered the playback will continue where the file left off.