Manual recording video
Make sure the VOX switch is set to OFF. Switch
the power to ON and the blue light will come on.
Press the record button, the blue light will go out
and the green will start flashing, the unit is now
recording. To stop recording, press the record
button and the blue light will come on again, and
the device has stopped recording.
Voice (VOX) recording
Make sure the VOX switch is set to ON, then switch
the unit on. Whenever sound above 65dB is heard,
the unit will start recording. Once the sound has
stopped, the device will return to standby and all
lights will go out.
Status Lights
Specification
Troubleshooting
Condition
Reason
On
Just booted
Off
Standby/Off
Slow flash
Low battery
Fast Flash
USB Mode
On
Storage full
Fast flash
No SD card
Slow flash
Recording
On
Charging
Off
Charged/Off
Status Light
Blue Light
Green Light
Red Light
Storage Capacity
Up to 32GB micro SD
USB interface
USB 2.0
Motion detect range
4 Meters (approx.)
Minimum illumination
1 LUX
Lens angle
72 °
Video format
AVI
Video Resolution
640x480
Framerate
30fps
Storage consumption
2GB per hour
(approx.)
Battery life continuous
4 hours (approx.)
Battery life voice
500 hour standby
Battery
DC 3.7V 620MAH
Storage temperature
-10 °C to 70°C
Operating temperature
-10 °C to 60°C
Weight
35g
Dimensions
78x33x12mm
Problem
Solution
Won’t turn on
Ensure the battery is
fully charged
Unit won’t record
Restart the camera,
check the battery is
charged. Format the
SD card on your PC
(this will erase all data)
Sound or video
distortions in
recordings
Fully charge the unit
Not detected by your
PC
Ensure the power
switch is on before
connecting
