Powering off the recorder
Press and hold the power button for 6-7 seconds,
until the red and blue light flash together. The
lights will then go out and the device has powered
off.
Setting date & time for video timestamp
Ensure the microSD card is installed and the unit
is powered off, then connect the SPYBAT007 to
your computer. Open the device so you can see
the contents of the SD card. Right click, select
‘New’ then ‘Text Document’ and name the file
time.
The date and time is stored in the following
format:
YYYY.MM.DD HH:MM:SS
Edit the file to the current date and time, for
example. At 3PM on the 14th October 2013 the
file would read:
2013.10.14 15:00:00
Once you have set it to the current date and time,
save the file. Now disconnect the device and
power it on. The date and time will be updated to
the information in the file.
All done!
Specification
Troubleshooting
Storage capacity
Up to 32GB micro SD
USB interface
USB 2.0
Motion detect range
6 meters (approx.)
Minimum illumination
1 LUX
Video format
AVI
Video resolution
1280x720p
Framerate
30fps
Photo format
JPG 3264x2448
Battery life from full
8 hours
Battery
DC 5V 3000MAH
Storage temperature
-20 °C to 80°C
Problem
Solution
Won’t turn on
Ensure the battery is
fully charged and that
the SD card has space
Unit won’t record
Restart the camera,
check the battery is
charged and that the
SD card has space
Sound or video
distortions in
recordings
Fully charge the unit
Not detected by your
PC
Ensure that the USB
connector is fully
pushed into the unit
