4
Original instructions
> English
Part. nr.
US
12 V – 34-1224
82044
24 V – 34-1225
82044-24
The bilge pump control combined
with an automatic switch is an
excellent installation for your boat.
The panel has a 3-position switch
for Off, manual On, and automatic
operation – the automatic feature
operates in combination with
an automatic switch.
Integrated fuse holder and
operating light. Fuses are not
included. Fuse is selected
according to the recommended
fuse size of the connected pump,
refer to the pump manual.
The switch is in matt black finish.
Size: 73 x 60 mm.
ELECTRICAL INSTALLATION
See fig. page 9
SPX FLOW Johnson Pump
submersible bilge pump/
Automatic Switch/ Bilge pump
control
Always install the switch and bilge
pump control or other switches
or fuses between the positive (+)
terminal of the battery and the
positiv (+) connection of the pump
(brown wire).
The negative (-) connection (black
wire) of the pump to be connected
directly to the negative (-) terminal
of the battery. Fuse size applies to
pump specification.
Electrical connections
All electrical connections must be
placed above the highest water
level. The wire connections should
be sealed with a marine sealant to
prevent wire corrosion. Insulation
or cable sheathings have to be
removed in such a way that they
end well above the highest bilge
water level.
Waste handling/
material recycling
At the products end of life,
please dispose of the product
according to applicable law. Where
applicable, please disassemble
the product and recycle the parts
material.
Bilge pump control 12 or 24 V
