SPXFLOW APV DELTA SI2 Instruction Manual Download Page 8

3

APV_SI2_UK-6_012019.indd

UK

Safety Valve

DELTA SI2

Instruction manual UK-rev. 6

APV

4.  Auxiliary Equipment

The valve can optionally be equipped with manual seat lift or seat lift 

actuator.

Reconstruction can be undertaken during operation without greater 

efforts.

 

-

Seat lift actuator

The SI2 valve can be equipped with a seat lift actuator if necessary 

for reasons of cleanability and / or remote function control.

(see chapter 5)

 

-

Valve feedback

A proximity switch to signal the closed or open position of the 

valve seat (ON/OFF) can be mounted on the seat lift actuator (C) if 

required.

We recommend using one of our APV standard types.

Operating distance: 5 mm / diameter: 1 mm / length: 30 mm.

If the customer decides to use a valve feedback other than APV 

type, we cannot take over any liability for a faultless function.

 

-

Cleaning device

An adapter with an integrated cleaning nozzle (D) can be flanged 

below the valve.

5. Cleaning

Lifting of the valve seat during the cleaning process

Rinsing of the contact surface between seat seal and seat and 

of the housing with the valve outlet port by the cleaning liquid is 

possible.

Cleaning device below the valve seat

Through an adapter with spraying device the product-wetted part of 

the valve to the valve seat can be cleaned

D

cleaning device

DN

Welded version

Flanged version

25

H147727

H316650

40

H147330

H316651

50

H147729

H316652

65

H145573

H316653

80

H148830

H316654

100

H148831

H316655

Cleaning device

Summary of Contents for APV DELTA SI2

























Reviews: