SPX SPIDAR NIC-500s, Operation Manual

Page: 71 / 119

SPIDAR SDK
63
5.2 Configuring the Ethernet connection
You will need to configure your computers’ Ethernet connection for SDK, to use a static IP
address on the same subnet as the NIC-500. The example below illustrates this on a PC
running Windows 10.
On your computer, launch the Network and Internet settings. Near the bottom, under
Advanced network settings, click Change Adapter Options (Figure 5-8).
Figure 5-8: Network & Internet Settings
You will see the image in Figure 5-9.
Figure 5-9: Configuring Ethernet connection
Determine which network connection will be used to communicate with the NIC-500. Most
laptop computers will have a wired and a wireless connection.