SPX S2045, Instruction Manual

Page: 9 / 78

Waukesha Cherry-Burrell Introduction
12/2010 95-03080 Page 9
Introduction
Factory Inspection
Each Waukesha pump is shipped completely assembled, lubri-
cated and ready for use. (Make sure you review “Operation” on
page 27 before operating your pump).
Receiving Your Pump
All ports are covered at the factory to keep out foreign objects
during transit. If the covers are missing or damaged, remove the
pump cover and thouroughly inspect the fluid head. Be sure the
pumping head is clean and free of foreign material before rotating
the shaft.
Receiving and Inspection
1. WCB equipment is inspected prior to shipment. When leaving
the factory, it is well-crated for normal transportation proce-
dures. WCB cannot, however, guarantee safe arrival. There-
fore, upon receipt of this equipment, check the received items
against the packing list for damaged or missing parts. Check
the packing material thoroughly for small parts.
2. Visually inspect for damage or loss. Immediately report any
damage or loss to the delivery carrier while present. Follow-
ing the immediate notification of the lost or damaged parts,
make a claim against the carrier including a detailed descrip-
tion of the loss or damage, and a cash value. WCB's respon-
sibility terminates F.O.B. point of manufacture unless
otherwise specified per the General Terms and Conditions of
Sale as published by WCB and amended from time to time.
Contact WCB Order Services if shipping information is
required for handling claims.
See also “Shipping Damage or Loss” on page 6.