RD5100H
2
O+ Operation Manual
© 2018 Radiodetection Ltd
41
You can use RD5100 Manager to register your products
to extend the warranty to a total of 3 years (see Section
12.4), setup your locator by performing a number of
maintenance tasks.
RD5100 Manager is compatible with PCs running with
Microsoft Windows XP, Windows 7, Windows 8,
Windows 8.1 and Windows 10.
For more information about RD5100 Manager refer to the
RD5100 Manager Operation manual.
To Obtain RD5100 Manager:
Contact Radiodetection for eCert and RD5100 Manager
availability: Go to
www.radiodetection.com
12.4 Warranty and extended
warranty
RD5100H
2
O+ locators and transmitters are covered by a
one year warranty as standard.
Customers can extend the warranty period to a total of
three years by registering their products (locators and
transmitters) within three months from purchase.
Visit
https://portal.radiodetection.com/
to create your
company portal account, and use the Product page to
register your locator or transmitter.
Information on how to create a company account can be
obtained from:
https://support.radiodetection.com
You can use
RD5100 Manager
to register your products
to extend the warranty to a total of 3 years. (See section
9.3)
From time to time Radiodetection may release new
software to improve the performance or add new
functionalities to his products. By registering users will
benefit from subscribing to e-mail alerts advising about
any new software and special offers related to its product
range.
Users will be able to opt out at any moment from
receiving software and technical notifications or just from
receiving marketing material.
12.5 Upgrading software
From time to time, Radiodetection may release software
upgrades to enhance features and improve performance
of the RD5100H
2
O+ locator or transmitter.
Software upgrades are free of charge.
You can check if your products are up-to-date or upgrade
them by using the RD5100 Manager Software upgrade
screen. Refer to the RD5100 Manager Operation manual
for further information.
E-mail alerts and notification of new software releases
are sent to all registered users.
NOTE: To upgrade your software you need to have
created an account using RD5100 Manager and have a
live internet connection. An optional Radiodetection
supplied power source may be required to update your
transmitter software.
12.6 eCert
TM
The RD5100H
2
O+ locator should be regularly checked to
ensure its correct operation.
eCert provides a thorough test of the RD5100H
2
O+
’s
locating circuitry and marker transceiver, and supplies a
Radiodetection Calibration Certificate when a positive
test result is obtained.
To run eCert, the locator should be connected to an
internet-enabled PC, on which the RD5100 Manager
software is installed. Additional eCert credits may be
required and purchased.
Refer to the RD5100 Manager
(i)
Operation Manual for
further details.
NOTE.
(i)
Contact Radiodetection for availability of the
RD5100 Manager.
NOTE. eCert is not presently available for transmitters.