MANUAL ENGLISH
Rev 1 date 26-04-11 RS 5-8
PLACEMENT OF THE RECEIVER
- Select a location, if possible, that is protected from the wind
and weather. Place it with cable-glands facing downward.
Avoid locations where the receiver may be exposed to
abnormal moisture conditions, e.g. during high pressure
washing.
Avoid locations close to metal objects, electrical cables and
antennas. Provide the receiver with a separate power supply.
NOTE! Upon delivery the receiver will be pre-wired.
! The following instructions should only be used in case of
reconnecting the wiring.
Rewiring the receiver:
Connect the right wiring to the terminals
- Black 2 (+) and the yellow/green cable according to the
above drawing.
Connect the signal cabling to the terminals for the relays:
-
Black 3 and 4 cables according to the above drawing
-
Black 2 on the relays is pre-wired on the circuit boards.
STORING THE TRANSMITTER CODE
:
How to program the id-code of the transmitter?
1. Unscrew the 4 screws to open the receiver.