3
381497 USA 10-2014
APV
Parts not manufactured to our specifications may cause damage to your
SPX
Flow Technology equipment and void all warranties. Use of parts that do not
meet SPX Flow Technology specifications may cause property damages and
serious bodily injury.
Policy regarding availability of service parts
SPX Flow Technology will attempt to remain in a position to supply
replaceable parts during the normal life of any item of SPX Flow Technology
equipment. This is contingent upon availability of tools, material and facilities
of our own as well as of our suppliers.
After the expiration of this period, the supply of service parts will be limited to
available stock of completed parts. If unable to supply the service part,
drawings will be furnished when available to permit local manufacturing, if
desired.
SPX Flow Technology reserves the right to improve, change or modify the
construction of its equipment or any parts thereof without incurring any
obligation to provide like changes to equipment previously sold.
Safety Information
Electrical Hazard
A pump is normally powered by an electric motor. This creates a hazard of
electrical shock which could cause severe injury or even loss of life.
To minimize the risk of this hazard:
All electric/electronic installation, maintenance, and service must be
performed by trained and authorized electricians only.
All electric/electronic installation must comply with all applicable codes and
standards including those established by OSHA (Occupational Safety and
Health Administration).
Do Not perform any maintenance or service on the motor or any other
electrical devices unless the electric power source has been turned off and
Locked Out using a locking device for which only the person involved in the
maintenance procedure has possession of the key.
Make installation suitable for a wet environment, including:
1. A power disconnect which can be locked in a power Off position and the
key removed. This will allow maintenance or service to be performed
without possibility of power being accidentally turned on.
2. Protection of all electric connections within a sealed junction box.
3. Proper grounding of the motor.
4. Protection from flooding. Do not install in an area which could fill with
water to a level which contacts the motor.
Warnings
