SPX APV DELTA M4, Operating Manual

Page: 9 / 81

- Valve position indication
For the valve position indication, a proximity switch holder (PSH)
can be installed direct on the actuator.
To signal the limit position of the valve seat, proximity switches can
be mounted to the holder if required.
We recommend our APV standard types:
operating distance: 5 mm / diameter: 11 mm.
If the user decides to apply valve position indicators other than
APV type, we cannot take over the liability for any malfunctions
resulting therefrom.
- Control Unit
The assembly of a control unit on the M4 valve is possible.
The following designs are available:
4. Auxiliary Equipment
4
PSH
- For the assembly of the control unit on the M4 valve an
adapter is required.
1 solenoid valve
Direct Connect CU31 Direct Connect
ref.-No.: 16-31-232/93
Profibus CU21V
ref.-No.: 16-31-236/93
Device Net CU31 Device Net
ref.-No.: 16-31-240/93
AS - Interface CU31 AS - Interface
ref.-No.: 16-31-244/93
adapter
Designation: CU 2 adapter - SW4 / SD4 / M4
ref.-No.: 08-48-415/93
control unit
with adapter
The tank bottom welding flange for the MT4 valve
does not form part of the scope of supply.
Order reference numbers for the tank bottom welding flange:
DN inch ref.-No.:
25 1” 31B 15 - 01 - 391/42
40 1,5” 31B 15 - 01 - 441/42
50 2” 31B 15 - 01 - 491/42
65 2,5” / 3” 31B 15 - 01 - 541/42
80 31B 15 - 01 - 641/42
100 4” 31B 15 - 01 - 691/42
tank bottom welding flange
DN inch C F
25 1” 138 M8
40 1,5” 153 M8
50 2” 168 M8
65 2,5” / 3” 200 M10
80 223 M10
100 4” 258 M10
C
F
Membrane Valve
DELTA M4
Operating Manual Rev. 1
UK