Cavitator
07/2014 456424-US Page
7
Introduction to the Cavitator Program
3.
Cavitator
Program:
3.1
The Cavitator is a standalone unit intended for use in the following
applications: Scale free heating, cavitation duty, and a combination of
heating and cavitation duties.
This manual covers all standard versions of the Cavitator.
Cavitator choices and optional equipment
3.2
As part of the Cavitator program there are a number of standard options,
meaning that the Cavitator is available as follows:
-
In 3A version
-
With NEMA-norm motor
-
With IEC norm motor
-
With rotors with other hole formations
-
With housing for larger radial clearance.
-
With single or double mechanical shaft seal for SiC/C or SiC/SiC
respectively
-
With O-rings in EPDM or FPM (FKM) (Kalrez or others).
-
The APV Cavitator can be delivered with all standard welded ferrules
(S-Line, bevel seat, ISO, etc.) or with special aseptic connections
prepared for sterile flushing.
Determination of Cavitator Type
3.3
On the intermediate flange, an identification label has been placed, as
shown on Figure 1. This contains the serial number of the Cavitator, as
well as the model number.
Determination of motor type
3.4
The motor is identified by removing the motor guard and reading the kW
and building height on the identification
www.spx.com
MODEL NUMBER
SERIAL NUMBER
Figure 1
