EU Declaration of Conformity
for Valves and Valve Manifolds
SPX Flow Technology Germany GmbH
Gottlieb-Daimler-Str. 13, D-59439 Holzwickede
herewith declares that the
APV relief valves of the series UF3 and variants ATEX design
in the nominal diameters DN 25 – 100, 1“ – 4“
meet the requirements of:
Machinery Directive 2006/42/EC
(superseding 89/392/EEC and 98/37/EC)
Equipment and Product Safety Act GPSG - 9.GPSGV
and
Directive on the Protection against Explosion 2014/34/EU ATEX (superseding 94/9/EC)
for Equipment Category -/2G IIB TX
For official inspections, SPX FLOW presents
a technical documentation according to Appendix VII of the Machinery Directive,
this documentation consisting of documents of the development and construction,
description of measures taken to meet the conformity and to correspond with
the basic requirements on safety and health, incl. an analysis of the risks,
an analysis of ignition hazards as well as an instruction manual with safety instructions.
The conformity of the valves is guaranteed.
An ATEX documentation is lodged at the notified body DEKRA EXAM GmbH
in Bochum, Germany (No. 0158)
Authorised person for the documentation:
Frank Baumbach
SPX Flow Technology Germany GmbH
Gottlieb-Daimler-Str. 13, D-59439 Holzwickede, Germany
November 2017
Frank Baumbach
Regional Engineering Manager, F&B Components