9
MATCHED NUMBER TO BE COMPARED WITH THE SAME
NUMBER ON THE RING GEAR. (EXAMPLE CO-43)
PINION SETTING DISTANCE. (EXAMPLE 4.860)
BACKLASH (NORMAL) AT WHICH THE GEARS WERE
LAPPED. (EXAMPLE .010)
MATCHED NUMBER TO BE COMPARED WITH THE SAME
NUMBER ON THE PINION GEAR. (EXAMPLE C0-43)
THE PINION SETTING DISTANCE IS THE DISTANCE
THE END OF THE PINION SHOULD BE FROM THE
CENTERLINE OF THE RING GEAR SHAFT.
Figure 4
Gear Match Numbers and Setting Data
Figure 3
Cross Section
FAN HUB
RETENTION HARDWARE
FAN SHAFT
WATER SLINGER
BEARING RETAINER
PIPE PLUG
GEAREDUCER CASE
OIL SEAL
PINION SHAFT
PINION CAGE
CAP
PINION CAGE
O-RING
O RING
OIL SLINGER
PINION GEAR
BOTTOM COVER CAP
RING GEAR
O-RING
BOTTOM BEARING
RETAINER CAP
RING GEAR
HUB
O-RING
DRAIN PLUG
AIR VENT
Summary of Contents for Marley Geareducer 2200
Page 2: ......