8
1. Without timer setting,the
operation mode is Cooling,Dry, Fan and Auto,and
the set temperature will be displayed.
Time will be displayed under timer setting.
Digital Display:
and Button:
2. Use these buttons on the
control panel and remote to increase or decrease
the Set Temperature or Timer.
Temperature range: 61
~88
or 16
~31
.
3. Turn the air conditioner on and
off.
Power Button:
Press the mode button to cycle
through the various modes: Cool, Dry, Fan and
Auto.
4.
Mode Button:
U
Timer Off:
P
Timer On:
P
Note:
It can be set to automatically turn off or on in
0.5-24 hours. Each press of the
buttons will increase or decrease the timer. The
Timer can be set in 0.5 hours increment below 10
hours and 1 hour increment for 10 hours or above.
The SET light will turn on while setting.
To cancel the setted function, press the TIMER
button again.
se the TIMER button on the
control panel or the remote to set the timer.
ress the TIMER button to turn timer
off, and press the
and
buttons to set
the shut off timer, after the display stops flashing,
press the TIMER button to confirm what you have
selected.
ress the TIMER button to set the timer
to on, use the
and
buttons to set the
timer to your satisfaction, after the display stops
flashing, press the TIMER button to confirm what
you have selected.
5.
Timer Button:
Cool Mode:
The cooling function allows the air
conditioner to cool the room and at the same time
reduces Air humidity. Press the MODE button to
activate the cooling function. To optimize the
function of the air conditioner, adjust the
temperature and the speed by pressing the button
indicated.
Dry Mode:
This function reduces the humidity of
the air to make the room more comfortable. Press
MODE button to set the DRY mode. An automatic
function of alternating cooling cycles and air fan
is activated.
Fan Mode:
The conditioner works in only
ventilation. Press MODE button to set the FAN
mode. With pressing FAN SPEED button the
speed changes in the following sequence: Hi, Med
and Lo in FAN mode. The remote control also
stories the speed that was set in the previous
mode of operation.
Auto Mode:
In AUTO mode the unit automatically
chooses the fan speed and the mode of operation
(COOL,DRY or FAN).In this mode the fan speed
and the temperature are set automatically
according to the room temperature (tested by
the temperature sensor which is incorporated
in the indoor unit.).
1
2
3
4
5
6
7
8
9
AUTO
SPEED
AUTO
MODE
Summary of Contents for WA-1223S
