Removing and Inserting the Filter
Note: Do not attempt to remove or insert the filter until the unit has cooled completely
To remove, insert thumb though spout opening and push gently.
To replace, first hook the small clip on bottom of filter to the indent at bottom of spout
opening. Push filter gently and hear it click in place.
Cleaning & Maintenance
Always unplug unit and allow to cool completely before cleaning.
Do not immerse power cord, kettle or power base in water.
1. Wipe the exterior with a clean damp cloth and wipe dry with a soft cloth. In order to
maintain the texture of the outer surface, never use abrasive cleaners.
2. To clean the interior, swish warm soapy water around with the lid closed. Rinse
thoroughly with water. You can also use a glass/bottle cleaning brush.
De-Scaling
Hard water can leave mineral deposits, creating scale build up inside the kettle. Periodical
de-scaling is needed. The interval of de-scaling depends on usage frequency and the
hardness of the water used. To avoid this build-up, it is recommended to use distilled water.
To de-scale, it is recommended to use Citric Acid (follow instructions on package), or:
1. Fill the kettle halfway with water and bring to boil.
2. Add one cup of white vinegar and allow mixture to sit for a minimum of 6 hours.
3. Empty the mixture and rinse out the kettle.
4. Refill the kettle with water only and bring to a boil. Discard water.
5. Repeat as needed.
Do not attempt to dismantle the kettle or power base. No user serviceable parts inside it.
For any problem, contact the authorized service facility for help.
SAVE THIS USER MANUAL!