•
Open the steam cover on the left side of the control panel.
•
Fill the water tank with clean water, taking care to ensure that the
maximum level marked on the water level indicator is not exceeded and
that no water enters any other part of the unit.
•
Close the steam cover and turn the heating control knob to the desired
setting: LOW or HIGH heat with steam. (left side of the dial).
Low: About 750W heat / High: About 1250W heat
•
After approximately 6 minutes of heating, steam will begin to generate
from the steam outlet.
When the water level reaches the REFILL line on the water level indicator,
more water should be added to the water tank.
•
Turn the control knob to the “OFF” position when not in use.
HINTS AND TIPS
•
Clean only with a damp cloth, do not pour water directly onto the unit.
•
Clean the filter once a week by removing and cleaning with a vacuum
cleaner.
•
Unplug the unit if it is not to be used for a long time.
Cleaning the filter
•
Turn off the unit at the heater control knob and unplug from the power
socket.
•
Remove the fixed screw.
•
Open the filter cover by pushing down on the two filter cover retaining
clips and pulling the filter cover downwards.
•
Remove the foam filter from the back of the filter cover and clean with a
vacuum cleaner.
•
Replace the filter and close the filter cover. Make sure the cover is
secured by both clips
and replace screw
.
5
Retaining clips
Filter
Screw