SPT SF-16D48BK Instructions Manual Download Page 3

1

Read Rules for Safe Operation and Instructions Carefully. 

WARNING

CAUTION

IMPORTANT SAFETY INSTRUCTIONS

1. Do not leave the fan running unattended.

2. Keep electrical appliances out of reach from Children or 

infirm persons. Do not let them use the appliances without 

supervision.

3.This appliance has a polarized plug (one blade is wider than 

the other). To reduce the risk of electric shock, this plug is 

intended to fit in a polarized outlet only one way. If the plug 

does not fit fully in the outlet, reverse the plug. If it still does 

not fit, contact a qualified electrician. Do not attempt to defeat 

this safety feature.

4. If the supply cord is damaged, it must be replaced by 

manufacturer or its serviceagent or a similarly qualified 

person in order to avoid a hazard.

5. This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless 

they have been given  supervision or instruction concerning 

use of the appliance by a person responsible for their safety 

Young children should be supervised to ensure that they do 

not play with the appliance.

6. When the fan was assembled, the rotor blade guard shall not 

be taken off anymore

    - Prior cleaning unplug the fan.

    - The rotor guard shall not be dissembled/opened to clean the   

   rotor blades.

    - Wipe the fan enclosure and rotor blade guard with a slightly  

  damp cloth.

Summary of Contents for SF-16D48BK












Reviews: