OPERATION
•
Make sure the unit is off before connecting power.
•
Allow sufficient space around the unit for air circulation.
1. Connect DC adaptor to the unit, then connect to power source.
2. Turn the unit ON. Power indicator will illuminate.
3. For SD-350Ti model, UV light automatically functions when the unit is in
operation. Both Power and UV indicator will illuminate.
4. When tank becomes full, the unit will auto shut off and the Full indicator
(in red) will illuminate.
5. To remove and empty water tank, first turn off the unit. Lift water tank
upwards and pull out gently. Gently remove tank cover and empty water.
NOTE: Do not press down on the floater – it may cause the floater to
become stuck.
MAINTENANCE
•
Make sure the unit is turned off and disconnected from power source
before cleaning or maintenance.
•
Wipe the unit with damp cloth.
•
Air inlet can be cleaned by vacuuming with a brush attachment.
•
Never use bleach or abrasive cleaners.
FILTER (for SD-350TI model only)
•
The filter is located on the top of the unit.
•
First, remove the filter cover by placing thumbs on the two clips and push
in, then upwards.
•
Pull on the ribbon to remove filter.
•
The dust filter (black filter) can be removed by first removing the frame –
push in on one side and pull. Clean dust filter under lukewarm water and
dry completely.
•
The white mesh is TiO2 mesh and also contains the UV light – DO NOT
wet. Tap to remove loose dirt or use a brush.
•
To replace filter cover, align the inner edge first, then push down firmly.
•
TiO2 mesh and UV light is effective for approx. 1 ½ years. Replacement
can be ordered from
www.spt-usa.com
or by calling 800-330-0388.
NOTE: Unit will not operate if filter or water tank is not in place.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
Unit has no power
•
Check your power source (circuit)
•
DC adaptor / power source is not
properly connected
•
Water tank is not in place
•
Filter is not properly installed
•
Water tank is full (red indicator light)
SPECIFICATION
MODEL
SD-350
SD-350TI
Voltage
12V
Rated Power
60W ±5W
Water Tank Capacity
4 pints (2000ml)
Moisture Removal
(per 24 hrs /
86°F, 80% RH)
11.83 oz (350ml)
Dimension
8 W x 4.93 D x 13 H inches
Net Weight
3.65 lbs (w/o adaptor)
Gross Weight
5 lbs
