8
•
Before loading the appliance with packages of fresh food, make sure they are cooled to
ambient temperature.
•
Ice and frost layer increase energy consumption, so clean the appliance as soon as the
layer is 3-5 mm thick.
•
Keep the rear (condenser) free of dust and impurities.
•
The appliance should be located in the coolest area of the room, away from heat
producing appliance or heating ducts and out of direct sunlight.
•
Overloading the appliance forces the compressor to run longer. Foods that freeze too
slowly may lose quality or spoil.
•
Wrap foods properly and wipe containers dry before placing them in the refrigerator.
This cuts down on frost build-up inside the appliance.
•
Do not line the storage bin with aluminum foil, wax paper or paper towel. Liners
interfere with cold air circulation, making the appliance less efficient.
•
Organize and label food to reduce door openings and extended searches. Remove as
many items as needed at one time and close the door as soon as possible.
9.
DISPOSAL
Old units still have some residual value. An environmentally friendly method of disposal will
ensure that valuable raw materials can be recovered and used again. The refrigerant used in your
unit and insulation materials require special disposal procedures. Ensure that none of the pipes
on the back of the unit are damaged prior to disposal. Up to date information concerning options
of disposing of your old unit and packaging from the new one can be obtained from your local
council office.
When disposing an old unit, break off any locks or latches and remove the door as a safeguard.
Correct Disposal of this product
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household
wastes. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources.
For more information, please contact the local authority or your retailer where you purchased
the product.